Structural, Thermal, Optical, Mechanical and Morphological Properties of ABS/RGO with DBDPE Nanocomposites

By : Ibrahim Karteri, Mustafa Ozyeşildağ

Page No: 167-177

Abstract
This study aims to provide a comprehensive account of chemically reduced graphene oxide (RGO) and decabromodiphenyl ethane (DBDPE) filled acrylonitrile-butadiene-styrene (ABS) multifunctional filaments for fused deposition modeling (FDM) applications. ABS/RGO with DBDPE nanocomposites (ABS-GDM) were fabricated by single-screw extrusion at a diameter of 1.75 mm. The proportion of RGO and DBDPE for the ABS-GDM filaments was set to 0.75 wt%. The properties of the ABS-GDM were determined using optical, mechanical, thermal, and morphological characteristics (using scanning electron microscopy). A three-dimensional (3D) model was successfully printed using the developed ABS-GDM filaments for FDM 3D printing. These ABS-GDM have the potential to be used in FDM 3D printing. Considering the optical band gap of the nanocomposites, they can also be used in optoelectronic devices and sensor applications. Also, the vertical combustion standard testing results showed that ABSGDM filaments can be flame retardant.

Authors :
Ibrahim Karteri
Department of Energy Systems Engineering, Faculty of Elbistan Engineering, Kahramanmara Istiklal University, Kahramanmara?,Turkey.

Mustafa Ozyeilda
Materials Science and Engineering Department, Kahramanmara, Sütçü Imam  University,Kahramanmara, Turkey.
 

DOI: https://doi.org/10.32381/JPM.2021.38.1-2.13